Interpret the Aptem Console 'Off-The-Job Hours' report

In this article:

  1. What the report shows
  2. How minimum required hours are calculated
  3. When the figures recalculate
  4. When figures show in red
  5. If the report shows 100% but minimum hours aren't met
  6. What counts towards completed hours
  7. Evidencing off-the-job hours
  8. Functional Skills on the Off-the-job evidence record
  9. Off-the-job hours after a learner is withdrawn
  10. Related articles

When you review a learner in Aptem Console, an off-the-job (OTJ) hours report shows. Here's an example.

Off-the-job hours report showing Minimum required, Planned, Completed, Forecast, and monthly A and B columns

What the report shows

  1. Minimum required: the minimum OTJ hours for the whole apprenticeship.
  2. Planned: the planned hours recorded in the main aim of the ILR at enrolment, for the whole apprenticeship. Shows "–" if not filled in.
  3. Completed: the total OTJ hours completed for the whole apprenticeship. This adds up the OTJ time logged against evidence that's Accepted or Verified, where the component is Completed or Verified. Referred evidence isn't included. Evidence on components with no due date is included.
  4. Forecast: completed OTJ hours plus the planned hours of every component not yet completed, for the whole apprenticeship.
  5. A: planned hours for the month. This adds up the planned hours of every component due that month, including Completed or Verified components.
  6. B: hours recorded in the month. This adds up the OTJ time on evidence whose completion date falls in the month, where the evidence is Accepted or Verified and the component is Completed or Verified.

The Overall progress infographic shows the learner's OTJ progress as a percentage. The horizontal blue line shows progress made, and the vertical line shows the target for today. The figures on the right show the percentage achieved and total completed hours. Hover over the infographic for more detail.

Overall progress infographic showing OTJ hours percentage completion and target line

How minimum required hours are calculated

Minimum required hours are based on the learner's ILR Learning Start date and:

  • the Learning Planned End date, while the Learning Actual End date is blank, or
  • the Learning Actual End date, once it's entered.

If the actual end date is entered later and differs from the planned end date, minimum required hours are recalculated.

If the minimum required hours in the learner's Training Plan differ from this report, check that the learner's ILR main aims aren't all excluded. See Where Training Plan data comes from.

When the figures recalculate

OTJ hours are recalculated when any of these change:

  • the Learning Planned End date in the ILR main aim
  • the Learning Actual End date in the ILR main aim
  • the learner's weekly contracted hours.

If a learner's OTJ hours have changed unexpectedly, check the ILR history for recent changes to these.

When figures show in red

  • Minimum required is red when it's higher than the forecast.
  • Planned (ILR) is red when it's higher than the forecast.
  • Forecast is red when it's below the minimum required or planned hours.

If the report shows 100% but minimum hours aren't met

The learning plan probably doesn't have enough planned OTJ hours. Make sure the planned OTJ hours across the learner's learning plan add up to at least the minimum required hours.

What counts towards completed hours

When a learner uploads evidence, only evidence with Off the Job Training hours chosen as the Hours Collection type counts towards their OTJ total. Other types record the time against the evidence but don't add to OTJ hours on the learning plan.

If evidence hasn't counted:

  1. Open the evidence record.
  2. Check the Hours Collection type.
  3. If it isn't Off the Job Training hours, amend the record or upload the evidence again with the right type.

For how to record OTJ hours when submitting evidence, see Submitting evidence.

Evidencing off-the-job hours

Use the Off-the-job evidence record document to show a learner's OTJ hours, for example to their end-point assessment organisation (EPAO). It lists the OTJ hours accepted against each completed activity in the learning plan, and you can generate it whenever you need to check them.

The Date on the record is the Completion Date entered when the evidence was uploaded.

To use the document, enable its template in the Compliance documents token in Programme Builder. See Configuring the Compliance documents templates.

Functional Skills on the Off-the-job evidence record

If Functional Skills are set up as learning plan components, or added from Functional Skills sub-programmes, their activities show on the record, even if they have 0 hours against them. You can't exclude Functional Skills components from the record.

If the Functional Skills step is enabled in your Onboarding Wizard, you can delete the Functional Skills components from the learning plan instead. This removes them from the record.

Off-the-job hours after a learner is withdrawn

In Aptem Console, you can only see a learner's OTJ hours before they're withdrawn. Afterwards, use Aptem Classic: open the learning plan for the previous programme, or report on the OTJ field in User Generic Reports (UGR).

Was this article helpful?
0 out of 1 found this helpful